Is it difficult to change engine oil on your own?

We will tell you how to change the oil in the engine with your own hands. Today we will give some tips on how to update it yourself. The time of year initially affects the brand of oil you choose, you also need to take into account the driving style and quality of gasoline. The oil change depends on the operating mode, the quality characteristics of gasoline, and seasonality.
First of all, the need for an oil change is influenced by the fuel consumed by your car. It is for the annual time interval that the corresponding mileage runs, and it is simply necessary to change the oil. Along with the oil change, it is better to update other technical fluids - brake hydraulics and antifreeze, as well as install clean filters - fuel and air. Where does the difference in the replacement interval come from?
It all depends on many factors, such as the model of the car, driving style, as well as what brand of oil you use. Engine oil should be changed immediately after buying a used car, including all consumables (filters: fuel and air filters, fluids: coolant and brake fluid). Replacement consists of preparatory and main parts.
During the preparation you need to:
Purchase an oil filter and oil. The required amount of oil is indicated in the manual for your vehicle.
Preparation of containers for draining used oil (ideally - a large container made of plastic or metal, you can cut a large canister).
Selection or purchase of a suitable key for draining engine oil from the bottom of the motor.
Oil change
Ideally, drive the car onto a flyover (or put it over a pit), so you will greatly facilitate the work.
Place the prepared container under the drain neck.
When the engine is warm, do not replace, you will burn yourself.
After completely draining the used grease, screw the plug back in place.
Next, the oil filter is removed.
Sometimes it happens that this can not be done.
If it won't budge, take a core (thick nail made of steel), you can use a screwdriver and punch it, then remove it.
Immediately put the purchased filter.
It is important to lubricate the rubber element with fresh engine oil before installation.
The last step is to pour it into the engine itself through a special hole.
Do not forget that you need to fill in the oil to the middle position of the level on the dipstick.
It's easier to add oil than to drain it, so take your time, let it calmly fill all the voids.
The old filter and working out are disposed of.
After warming up and cooling down the engine, check the oil level and, if necessary, bring it to the required level.
Recheck the oil level in the engine, if necessary, it can be topped up. Best SMM Panel for YouTube Watch Time Buy Views, Comment, and Likes!